Steelworks welding machine MIG MAG 160 m IGBT / full Synergic 5 in 1 combination device with real 160 amps and 2 rollers drive / filling wire, Mig Mag, Arc MMA, Lift Tig

• MIG/MAG - metal protection gas welding with DC (DC). It can be welded with inactive/inerts (MIG, e.g. Argon) or with active (MAG, e.g. CO2). Gas and welding wire come from a burner head and enable welding work with just one hand.
• Fully syngical device: The voltage (volt) and the wire feed always adopts automatically via the set welding current. The device is therefore very easy to use, especially for beginners.
• 5 in 1 combination device - MIG/MAG, filling wire, lift tig & mma welding is possible up to 160 a.
• IGBT Technology - the latest and most modern transistor technology enables the highest performance and a high switching duration (ED)! No transformer, no MOSFET, the most modern IGBT!
• Light & compact design - only 4.5 kg weight and dimensions of 320 x 140 x 260 mm. Innovative IGBT transistors save space and weight compared to the old MOSFET technology. No more difficult wear!

• The welding machine supplies the highest efficiency & performance - single -phase change current (230 V) and allows a output of real 160 amps.
• Smart cooling & overheating protection - the latest technology, integrated overheating protection and high performance cooling enable the maximum performance.
• Fill wire-All of our devices can use fill wire (flux-cored wire). This enables welding without protective gas.
• Automatic wire feed - the speed of the wire feed is automatically regulated via the set welding current.
• Automatic voltage control (volt) - The voltage automatically adapts to the set welding current.
• Trolling roller - standard wire roles 1 kg can be processed here. The roundworm can accommodate 16 mm coils.
• Wire drive roller - Due to the easy change of the drive roller, different wire thickness can be used (0.6 mm / 0.8 mm / 1.0 mm).
• MMA electrode welding / MMA welding - is a universal welding process. No protective gas is required.
• Lift tig - with a separately available (not included in the scope of delivery), the hose package can also be welded with the device DC WIG (string ignition).

Notice: Note the correct current for a perfect welding result:
At least 60 amps are required for welding 0.6 wire
At least 80 amps are required for welding 0.8 wire
At least 100 amps are required for welding at 1.0 wire

Notice: The device is not intended for use in living areas in which the power supply is carried out via a public low -voltage supply system. It may be difficult to ensure electromagnetic tolerance in these areas, both through a line -bound and emitted disturbance.

• 1 x welding device steel mill 160 m igbt
• 1 x professional MIG welding burner AK-15 / hose package 2 meters. This is firmly installed on the device
• 1 x MIG accessory set 3-part (this is already pre-assembled on the MIG/MAG Brenner):
  - 1 x gas nozzle
  - 1 x power nozzle 0.8 mm
  - 1 x gas nozzle holder

• 1 x power nozzle M6 x 28 - Ø 0.8 mm
• 1 x power nozzle M6 x 28 - Ø 1.0 mm
• 1 x welding shield
• 1 x 0.5 kg of filling wire roller 0.8 mm
• 1 x mass cable 3 meters
• 1 x electrode holder 3 meters
• 1 x gas connection hose with 5 meter speed coupling
• 1 x wire guide roll 0.6 mm & 0.8 mm (0.8 mm & 1.0 mm is already installed in the device)
• 1 x protective cover
• Swiss adapter 10a