Steelworks Flux 120 m fill wire welding device with a synergic wire feed for 0.6 0.8 0.9 1.0 mm, suitable for 0.45-1 kg wire rolls, welding wire and real 120 amps for welding without protective gas no gas

• Fill wire welding (flux) - welding without protective gas. Welding with a filling wire (Flux-Cored-Wire) is based on a process similar to Mig Mag welding with the difference that no protective gas does not have to be added in this procedure.
• Synergian wire feed - the wire feed speed is controlled fully automatically via the welding current.
• IGBT Technology - The latest generation of the latest transistor technology enables the highest performance and switch -on duration (ED) at full power! No transformer, no MOSFET, the most modern IGBT!
• Light & compact construction - innovative IGBT transistors save space and weight compared to the old MOSFET technology. No more difficult wear!
• The device supplies the highest efficiency & performance - single -phase change current (230 V) and allows a output power of real 120 amps.
• Smart cooling & overheating protection - the latest technology, integrated overheating protection and high performance cooling enable the maximum performance.

• Trolling roller - commercially available wire rollers from 0.45 kg to 1 kg can be processed here. The roundworm can accommodate 16 mm coils.
• Wire drive roller - Due to the simple change of the drive roll of 0.6 mm - 0.8 mm and 0.8 mm - 1.0 mm, different wire thicknesses in the sizes of 0.6 mm / 0.8 mm / 0.9 mm / 1.0 mm can be used.

A notice: In order not to damage the device, please note the following note: When the wire roll is closed, it is a bayonet closure. This must first be pressed against the spring when solved and only then turned to the left. After inserting the roll, the closure must be pressed in again and then closed to the right.

A notice: The device is not intended for use in living areas in which the power supply is carried out via a public low -voltage supply system. It may be difficult to ensure electromagnetic tolerance in these areas through a line -bound and emitted disturbance.

• 1 x steel mill flux 120 m fill wire welding machine
• 1 x flux burner hose package 2 meters
• 1 x 3-part accessories set (already pre-assembled on the Flux Brenner):
  - 1 x gas nozzle
  - 1 x power nozzle 0.8 mm
  - 1 x gas nozzle holder

• 2 x power nozzles 0.9 mm
• 1 x mass cable 2 meters
• 1 x high -quality wire brush
• 1 x steel mill Schlackhammer
• 1 x wire guide roller 0.6 & 0.8 mm (0.8 & 1.0 mm pre -assembled)
• 1 x protective cover