STAHLWERK FLUX 160 ST Digital | 3-in-1 cored wire inverter 160 A | Welding machine for FLUX, MMA, Lift-TIG | Synergic wire feeder | Welding without shielding gas | Digital display | Easy to use

• Cored wire welding (FLUX) - welding without shielding gas. Welding with cored wire (flux-cored wire) is based on a similar process to MIG MAG welding, with the difference that this process does not require the supply of protective gas.
• Synergic wire feed - The wire feed speed is controlled fully automatically via the welding current.
• Digital display - The welding parameters can be easily read on a clear digital display. The different modes can be quickly set using the intuitive menu.
• IGBT technology - State-of-the-art transistor technology of the latest generation enables maximum performance and duty cycle (ED) at full power! No transformer, no MOSFET, state-of-the-art IGBT!
• Lift-TIG - In combination with the optionally available STAHLWERK WP-17V welding torch, the versatile inverter welding machine can be converted into a TIG welding machine with Lift-TIG.

• Lightweight & compact design - Innovative IGBT transistors save space and weight compared to old MOSFET technology. No more heavy carrying!
• Highest efficiency & performance - Single-phase alternating current (230 V) supplies the device and allows an output power of real 160 amps.
• Smart cooling & overheating protection - State-of-the-art technology, integrated overheating protection and high-performance cooling enable maximum performance to be achieved.
• Wire roll - Commercially available wire rolls from 0.45 kg to 1 kg can be processed here. The bobbin mandrel can hold 16 mm bobbins.
• Wire drive roller - by simply changing the drive roller from 0.6mm - 0.8mm and 0.8mm - 1.0mm, different wire thicknesses can be used in the sizes 0.6mm / 0.8mm / 0.9mm / 1.0mm.

Note: The device is not intended for use in residential areas where power is supplied via a public low-voltage power supply system. It may be difficult to ensure electromagnetic compatibility in these areas due to both conducted and radiated interference.

• 1 x STAHLWERK FLUX 160 ST digital welding machine
• 1 x STAHLWERK FLUX welding torch AK14 / MB14 for wire thicknesses from 0.6 to 1.0 mm
• 1 x ground cable 1.2 m (ø 20 mm²)
• 1 x nozzle holder (pre-assembled on burner)
• 1 x contact tip 0.9 (pre-mounted on torch)
• 1 x Flux Welding Wire 0.9mm / 0.45kg
• 1 x Slag Hammer
• 1 x Wire Brush
• 1 x Protective Case
• CH fixed adapter 16A