Stahlwerk 4-in-1 combi welding device DC WIG 200 PULS PRO CUT Full equipment, Digital 200 A IGBT Inverter with DC WIG | MMA | Pulse function and integrated 40 A plasma cutter

• DC Wig welding - DC (DC). Welding of almost all metals, such as steel, stainless steel, copper and much more, Note: Not suitable for aluminum - an AC/DC device is required for this.
• 4 in 1 combination device - Wig welding is possible up to 200 A, MMA weld up to 160 A.
• Extensive pulse function - WIG pulse - prevents burning of materials and reduces deformation by heat, particularly suitable for welding thin panels, the material of which may only be heated. Adjustable parameters are: pulse flow, pulse frequency, long and short pulse.
• 2T/4T (WIG) - determines the control of the operating mode and offers extended control over the course of the current. In 2T mode, the high frequency ignition (HF) remains active until the button on the Brenner is released. In the 4T mode, after pressing and letting go of the die button, the lacquer is ignited. After pressing and releasing again, the ignition ends. Some functions such as reducing electricity are only possible in the 4T.
• Sinking electricity - prevents the formation of lunker places (end crater) at the end of welding.
• Gas reference (WIG) - the tungsten electrode protects against too high wear and protects the weld seam from oxidation. The parameter can be set individually and separately. He indicates how long after the ignition should flow gas.
• IGBT Technology - the latest and most modern transistors technology enables the highest performance and a high switching time (ED)! No transformer, no MOSFET, the most modern IGBT!

• Light & compact design - only 6.8 kg weight and dimensions of 365 x 152 x 275 mm. Innovative IGBT transistors save space and weight compared to the old MOSFET technology. No more difficult wear!
• HF ignition (WIG) - enables contactless ignition and ensures a much better welding result. No lift arc, no stroking ignition!
• Welding current / pulse current - through the two parameters "welding current" and "impulse current" you can set two different current strengths for a welding process, between which the welding current always changes.
• Impulse width - With the pulse width, you set how long the welding current takes on the current of the pulse current before setting up back to normal welding current strength.
• Impulse frequency - The pulse frequency determines how often the current changes in a specified period between the two set values.
• Innovative hose package including modified WP-26 burner with flex head. This enables flexible and simple work.
• Hotstart - Automatic voltage increase when starting for better detonator results.
• Anti -stick - automatic shutdown of the welding current when the electrode sticks enables easy removal.
• WIG (Wolfram-Inert-Gas)-protective gas welding with inert/inactive gases such as Argon 4.6 (99.996 %). An arc between tungsten electrode and workpiece is created in an argon bell. This melts the material and the additional material supplied if necessary. A weld seam is created.
• MMA electrode welding / ARC welding - a universal welding process. An arc makes the electrode melt and thus forms the weld seam. No protective gas is required.
• Job memory - memory option for self -configured settings / presets. There are 10 storage spaces available.
• Plasma / cut - a plasma beam is generated using electricity, which melts the material on, which is then removed with compressed air. In this way, all conductive metals such as standard steel, stainless steel, copper, aluminum, titanium and much more can be easily cut precisely.
• The device is suitable for welding thin sheets as well as processing of band steels and flat iron at all types of steel with a low, medium or high carbon content as well as stainless steel, copper, nickel, CR-MO and alloyed steel metals.
• The plasma cutter delivers powerful 40 amps and has precise contact inflammation for first -class ignition behavior.
• The cutting output is up to 12 mm (construction steel ST37 to 12 mm, V2A or V4A up to 7 mm, aluminum up to 4 mm).

A notice: Not suitable for aluminum - an AC/DC device is required for this.

A notice: The device is not intended for use in living areas in which the power supply is carried out via a public low -voltage supply system. It may be difficult to ensure electromagnetic tolerance in these areas, both through line -bound and emitted disturbance.

• 1 x steel mill DC WIG 200 PULS PRO CUT welding machine
• 1 x professional WIG welding burner WP-26F / hose package 3 meters* with flexible burner head and kink protection on the GIG TIG TIG TIG TIGS SET 8-part
• 1 x PROFI plasma hose package AG-60/SG-55 3 meters
• 1 x plasma accessories set 3 parts (this is already pre-assembled on the plasma grenner):
  - 1 x plasma jug
  - 1 x plasma electrode
  - 1 x ceramic cap
  
• 1 x water separator with manometer and snap-on quick couplings
• 1 x connection hose with snap-on quick couplings from the device to the water separator
• 1 x mass cable 3 meters
• 1 x wearing parts Set AG-60 25 parts (10 plasma jets, 10 plasma electrodes, 5 ceramic caps)
• 1 x WIG welding sticks ER70S-G3 steel / Ø 2.4 x 500 mm / 1 kg
• 1 x welding sticks WIG ER307SI stainless steel upright Ø 1.6 mm x 500 mm
• 1 x tungsten electrodes / welding electrodes WL15 gold 5 x 1.6 mm + 5 x 2.4 mm
• 1 x wear parts set WP-26 36-part:

- 5 x tungsten electrode 1.6 x 175 WL15 gold

- 5 x tungsten electrode 2.4 x 175 WL15 gold

- 10 x gas nozzles 2 x size 4.5.6.7.8

- 2 x clamping sleeve housing 1.6 mm

- 2 x clamping sleeve housing 2.4 mm

- 5 x clamped sleeves 1.6 mm

- 5 x clamping sleeves 2.4 mm

- 1 x long burner cap

- 1 x short burner cap

• 1 x protective cover
• 1 x pressure reducer
• 1 x welding helmet worker 3-in-1 automatic welding helmet welding shield
• CH fix adapter 16A