Steelworks welding machine AC / DC WIG 200 PULS ST IGBT Full equipment / 200 A WIG & MMA welding machine with pulse function / aluminum welding machine
The Stahlwerk AC/DC WIG 200 Puls ST is a multifunctional 200 amps strong WIG welding machine with MMA or electrode welding function. One of the many advantages of this combination welding device in practical full equipment is the compact design and the low weight of only 13 kg. The AC/DC WIG 200 PULS ST has an extensive pulse function, which makes it easier to weld thin sheet. Parameters such as impulse current, pulse frequency, long and short pulse are easy to adjust. With WIG welding, contactless HF ignition enables comfortable work and better welding results. The AC/DC WIG 200 PULS ST welding machine is delivered with an innovative hose package including WP-26F burner including Flexkopf. The WP-26F Brenner has a setting wheel for direct regulation of the welding current and is attached to the hose with a ball joint. This enables the highest flexibility in WIG welding.
Description
Technical data
Output current WIG / MMA | 10-200 a |
Type of protection | IP21S |
Isolation class | F |
Mains voltage | 230 V AC (+-15 %) / 1 ~ (single phase) |
Network frequency | 50/60 Hz |
Maximum network current (i1max) (WIG / MMA) | 27.7 a / 39.7 a |
Largest effective network current (i1eff) (WIG / MMA) | 14.5 a / 13.5 a |
Weight | 12.9 kg |
Dimensions L x W x H (mm) | 455 x 220 x 370 |
Network connection | Schuko-Bauart CEE 7/7 with CH-fix adapter |
Stand up | IEC 60974-1; EN 60974-10 (Class A) |
Functions
- AC/DC WIG welding change (AC) and DC (DC). Welding of almost all metals such as steel, stainless steel, aluminum, copper and much more.
- 2 in 1 combination device - WIG & MMA welding is possible up to 200 a.
- Extensive pulse function - WIG pulse - prevents burning of materials and reduces deformation by heat, particularly suitable for welding thin panels, the material of which may only be heated. Easurable parameters are: impulse current, pulse width, pulse frequency, long and short pulse.
- IGBT technology - the latest and most modern transistors technology enables high performance when welding! No transformer, no MOSFET, the most modern IGBT!
- Light & compact design -only 12.9 kg weight and dimensions of 455 x 220 x 370 mm. Innovative IGBT transistors save space and weight compared to the old MOSFET technology. No more difficult wear!
- HF ignition - enables contactless ignition and ensures a much better welding result. No lift arc, no stroking ignition!
- The device supplies the highest efficiency & performance - single -phase change current (230 V) and allows a output power of real 200 amps.
- Smart cooling & overheating protection - the latest technology, integrated overheating protection and high performance cooling enable the maximum performance.
- Attention - bottle connection: W21.8 x 1/14 ” - gas bottles from the Netherlands and Great Britain may have a different connection! Please check the connections for your compatibility before buying!
Properties & advantages
- 2T/4T (WIG) - determines the control of the operating mode and offers extended control over the course of the current. In 2T mode, the high frequency ignition (HF) remains active until the button on the Brenner is released. In the 4T mode, after pressing and letting go of the die button, the lacquer is ignited. After pressing and releasing again, the ignition ends. Some functions such as reducing electricity are only possible in the 4T.
- Electricity increase/lowering - prevents the formation of lunker places (end crater) at the end of welding.
- Gas reference (WIG) - the tungsten electrode protects against too high wear and protects the weld seam from oxidation. The parameter can be set individually and separately. He indicates how long after the ignition should flow gas.
- Innovative hose package including modified WP-26 burner with flex head. The welding current is regulated via a adjusting wheel installed directly on the burner. The burner is connected to the hose package via a ball joint. This enables flexible and simple work.
- AC balance-is a variable setting between the breaking of the oxide layer (-) and a deeper incorporation (+). This helps to influence the properties of different materials and alloys.
- Remote regulation via burner or pedal - the welding current can be set comfortably at any time via the rotary control assembled on the burner. Alternatively, the welding current can also be regulated with our optionally available foot pedal.
- Welding current / pulse current - through the two buttons "welding current" and "impulse current" you can set two different current strengths for a welding process, between which the welding current always changes.
- Impulse width - With the pulse width, you set how long the welding current takes on the current of the pulse current before setting up back to normal welding current strength.
- Impulse frequency - The pulse frequency determines how often the current changes in a specified period between the two set values.
- Long pulse - the weld seam becomes wider, the heat supply is higher and the incorporation is deeper.
- Shortpuls - The welding bath can be better checked and the risk of welding a hole in the sheet is lower.
- Foot pedal - remote -controllable power control via foot pedal (not included in the scope of delivery). The foot control mode offers you the advantage that you can also regulate the electricity during the welding process, which gives you various options for executing the welding work. The maximum current is set on the device. The foot pedal is placed on 10. When pressing the foot pedal, the device lights up with a lower electricity than on the display. As soon as the foot pedal is fully pushed through, the set maximum current can be reached. The value on the display does not change in the meantime. Examples:
- Maximum current display: 100A / ignition current through pedal: approx. 40 a
- Maximum current display: 150a / ignition current through pedal: approx. 80 a
- Maximum current display: 200A / ignition current through pedal: approx. 110 a - Hotstart - Automatic voltage increase when starting for better detonator results.
- Anti -stick - automatic shutdown of the welding current when the electrode sticks enables easy removal.
- WIG (Wolfram-Inert-Gas)-protective gas welding with inert/inactive gases such as Argon 4.6 (99.996 %). An arc between tungsten electrode and workpiece is created in an argon bell. This melts the material and the additional material supplied if necessary. A weld seam is created.
- MMA electrode welding / ARC welding - a universal welding process. An arc makes the electrode melt and thus forms the weld seam. No protective gas is required.
- Notice: The device is not intended for use in living areas in which the power supply is carried out via a public low -voltage supply system. It may be difficult to ensure electromagnetic tolerance in these areas, both through line -bound and emitted disturbance.
scope of delivery
- 1 x steelworks AC/DC WIG 200 PULS ST IGB
- 1 x professional WIG welding burner WP-26FR / hose package 3 meters* with a adjustment wheel for the remote control of the welding current on the handle, ball joint and flexible burner head
- 1 x Wig Tig accessory set 8 parts:
- 3 x gas nozzles sizes: 5, 6, 7
- 1 x clamping sleeve size: 1.6
- 1 x clamping sleeve housing size: 1.6
- 2 x burner cap - a short one and a long one
- 1 x universal tungsten electrode
*Pre-assembled accessories from the mapping of the welding burner belongs to the 8-part set.
- 1 x mass cable 3 meters
- 1 x electrode holder 3 meters
- 1 x wire brush
- 1 x gas connection hose with 5 meter speed coupling
- 1 x WIG welding sticks steel mill ER70S-G3 steel / Ø 2.4 x 500 mm / 1 kg
- 1 x welding sticks WIG ER307SI stainless steel upright Ø 1.6 mm x 500 mm
- 1 x welding sticks WIG addition er4043si5 aluminum 1.6 mm x 500 mm 1 kg
- 1 x tungsten electrodes / welding electrodes WL15 gold 5 x 1.6 mm + 5 x 2.4 mm
- 1 x pressure reducer
- 1 x fully automatic welding helmet ST-990 XW with 3 in 1 function white
- CH fix adapter 16A
Our recommendations
7 year guarantee*
On everything - except wear parts
Refund warranty
Uncomplicated return and reimbursement of the purchase price 30 days after purchase
Hotline: +49 (0) 152-34 58 56 66
Mon. to Fri. from 10 a.m. to 5 p.m. Telephone advice & technical support by qualified specialist staff
WhatsApp & email support
Our WhatsApp number: 076 604 54 05-or tell us your request via contact form or directly to info@stahlwerk-schweiz.ch