Stahlwerk WIG welding burner WP-26 FR with 5 meters of hose package up to 200 A with remote regulation for WIG /ARC welding

The WIG welding burner WP-26 FR steelworks is ergonomically designed and enables fatigue-free work over the longer period thanks to its special design. The scope of delivery includes a five -meter -long, gas -cooled hose package. The burner is flexibly designed and adapts optimally to different welding positions. The WIG burner WP-26 FR has a setting wheel for regulating the welding current. The burner is attached to the hose with a ball joint. This enables the highest flexibility in WIG welding. The welding current can be adjusted comfortably at any time via the rotary control assembled on the burner. The contact for the welding current rotary control is established via a 3-pole connecting plug. The gas supply is connected via an union nut with connection thread (M16x1.5). The switching contact for the ignition is established via a 2-pin connecting plug. The latest generation of the steelworks hose packages via a built -in mass connection in the gas hose. This eliminates an additional connection connector and the hose is more robust. It is possible to use tungsten electrodes with diameters of 1.0 to 3.2 mm. The gas flow can be up to 20 l/min. With remote regulation. The Flex head achieves full flexibility by warming up when working. We therefore only recommend bending the head after a few minutes of sweat. The WP-26 for welding torch is 100 % compatible with the following devices from our program: AC/DC WIG 200 pulse with plasma ST, AC/DC WIG 200 PULS ST IGBT, AC/DC WIG 200 Clean ST and DC WIG WIG WIG ST.