STAHLWERK welding machine FLUX 160 ST Digital with 160 A full equipment, synergic wire feed, Lift TIG and MMA function for welding without protective gas

• Cored wire welding (FLUX) - welding without shielding gas. Welding with cored wire (flux-cored wire) is based on a similar process to MIG MAG welding, with the difference that this process does not require the supply of protective gas.
• Synergic wire feed - The wire feed speed is controlled fully automatically via the welding current.
• Digital display - The welding parameters can be easily read on a clear digital display. The different modes can be quickly set using the intuitive menu.
• IGBT technology - State-of-the-art transistor technology of the latest generation enables maximum performance and duty cycle (ED) at full power! No transformer, no MOSFET, state-of-the-art IGBT!
• Lift-TIG - In combination with the optionally available STAHLWERK WP-17V welding torch, the versatile inverter welding machine can be converted into a TIG welding machine with Lift-TIG.

• Lightweight & compact design - Innovative IGBT transistors save space and weight compared to old MOSFET technology. No more heavy carrying!
• Highest efficiency & performance - Single-phase alternating current (230 V) supplies the device and allows an output power of real 160 amps.
• Smart cooling & overheating protection - State-of-the-art technology, integrated overheating protection and high-performance cooling enable maximum performance to be achieved.
• Wire roll - Commercially available wire rolls from 0.45 kg to 1 kg can be processed here. The bobbin mandrel can hold 16 mm bobbins.
• Wire drive roller - by simply changing the drive roller from 0.6mm - 0.8mm and 0.8mm - 1.0mm, different wire thicknesses can be used in the sizes 0.6mm / 0.8mm / 0.9mm / 1.0mm.

Note: The device is not intended for use in residential areas where power is supplied via a public low-voltage supply system. It may be difficult to ensure electromagnetic compatibility in these areas due to both conducted and radiated interference.

• 1 x STAHLWERK FLUX 160 ST digital welding machine
• 1 x FLUX welding torch AK14 / MB14 for wire thicknesses from 0.8 to 1.0 mm, 9 mm connecting mandrel with wire feedthrough, 2-pole connection for switching operations
• 1 x ground cable 1.2 m (ø 20 mm²)
• 1 x nozzle holder (pre-assembled on burner)
• 1 x contact tip 0.8 (pre-mounted on torch)
• 2 x contact tips 0.9
• 2 x Cored Wire Nozzles
• 3 x wire guide rollers 0.6 mm / 0.8 mm, 0.8 mm / 1.0 mm, (0.8 mm / 1.0 mm is already installed in the device) - all guide rollers are knurled
• 1 x Slag Hammer
• 1 x Protective Case
• 1 x welding wire MIG MAG premium cored wire E71T-GS S100/D100
• 1 x STAHLWERK automatic professional welding helmet
• Swiss fixed adapter 16A