Stahlwerk MIG MAG 200 Double pulse per full equipment Full-syngical welding machine with AK25 welding burner and AK25 wear parts set

• Extensive, double pulse function in the MIG welding prevents the burning of materials from burning at low root heights and reduces deformation by heat. Therefore, the MIG 200 double pulse per welding machine is particularly suitable for welding thin sheets and materials, which can only be heated.
• The MIG 200 double pulse Pro works on the basis of an advanced IGBT module with the latest inverter and control technology.
• With the MIG 200 double pulse per welding machine, non-, low and high-alloy steels such as steel, stainless steel and aluminum alloys can be processed and welded.
• Thanks to the pulse function and advanced burner ergonomics, welding work can be carried out in all known joint forms (blunt seams and throat seams) and positions (climbing seam, case seam, cross-seam).
• Comfortable selection of the operating modes twin, spot and permanent spot as well as other special welding functions.
• The welding device is suitable for using solid welding wire (steel, stainless steel; Ø 0.8 - 1.0 mm and aluminum; Ø 1.0 - 1.2 mm) and filling wire. This means that a wide variety of materials can be processed and welded.

• Universally usable 3 in 1 combination device. Mig, Mag and MMA welding is possible up to 200 amps.
• Built -in safety function to reduce voltage (Volt Reduction Device - VRD). To increase safety during welding, the U0 idle voltage is reduced to 14 volts in MMA mode. The welding device automatically recognizes the start of the welding process and then increases the idle voltage up to 62 volts. VRD is pre -set at the factory and cannot be switched off.
• Built-in job memory enables the setting of preferences and parameters to do recurring work efficiently and quickly. Jobs and parameters can be restored. This enables convenient work without a lot of time during the set -up times.
• The 2T/4T (MIG) mode allows control of the operating mode and offers extended control over the current course in special 2 and special 4 bar mode.
• Automatic wire feed for the precise regulation of the wire feed speed in direct dependency on the set welding current.
• Extensive setting options related to electricity and functions via intuitive graphics interface in the display.

Notice: The device is not intended for use in living areas in which the power supply is carried out via a public low -voltage supply system. It may be difficult to ensure electromagnetic tolerance in these areas, both through line -bound and emitted disturbance.

Notice: Please note that the carbon soul was designed exclusively for processing aluminum and stainless steel. Please always use a steel soul to weld steel to avoid damage!

• 1 x steel mill MIG 200 double pulse per
• 2 x wire guide roll 0.8 & 1.0 mm with V-profile for steel (already installed in the device)
• 2 x wire guide roll 1.0 & 1.2 mm with a U-profile for aluminum
• 1 x gas connection hose with 3 meter speed coupling
• 1 x mass cable 3 meters (25 mm2; with 13 mm thorn)
• 1 x professional MIG welding burner AK-25 / hose package 3 meters with Euro central connection.
• 1 x MIG accessory set 3 parts (already pre-assembled on the MIG/MAG Brenner)
  1 x gas nozzle
  1 x electricity nozzle 0.8 mm
  1 x gas nozzle carrier
• 1 x mig likes wear parts set 28-part
• 1 x power nozzle M6 x 28 x 0.8 mm
• 1 x power nozzle M6 x 28 x 1.0 mm
• 1 x wire brush
• 1 x assembly key
• 1 x protective cover
• 1 x welding wire MIG/MAG steel Ø 0.8 mm ER70S-6 SG2 wire roll 5 kg
• 1 x pressure reducer
• 1 x Profi Schweißhelm
• 1 x CH fix adapter 16A