Stahlwerk combi welding device CTM-2550 ST digital full equipment 5-in-1 protective gas welding device | Inverter with 200 A, synergic wire feed and integrated 50 A plasma cutter cut | Wig

• DC Wig welding - DC (DC). Welding of almost all metals such as steel, stainless steel, copper, brass and much more Note: Not suitable for aluminum - an AC/DC device is required for this.
• 5 in 1 combination device - cut | WIG | Mig Mag | MMA | Flux
• 2T/4T - determines the control of the operating mode and offers extended control over the course of the current. In 2T mode, the ignition remains active until the button on the Brenner is released. In the 4T mode, after pressing and letting go of the die button, the lacquer is ignited. After pressing and releasing again, the ignition ends.
• Gas reference (WIG) - the tungsten electrode protects against too high wear and protects the weld seam from oxidation. The parameter can be set individually and separately. He indicates how long after the ignition should flow gas.
• Light & compact construction - innovative IGBT transistors save space and weight compared to the old MOSFET technology. No more difficult wear!
• HF ignition (WIG) - enables contactless ignition and ensures a much better welding result. No lift arc, no stroking ignition!
• The device supplies the highest efficiency & performance - single -phase change current (230V) and allows a output power of real 200 amps for WIG + MIG MAG + MMA.
• Smart cooling & overheating protection - the latest technology, integrated overheating protection and high performance cooling enable the maximum performance.
• WIG (Wolfram-Inert-Gas)-protective gas welding with inert/inactive gases such as Argon 4.6 (99.996 %). An arc between tungsten electrode and workpiece is created in an argon bell. This melts the material and the additional material supplied if necessary. A weld seam is created.
• MMA electrode welding / ARC welding - a universal welding process. An arc makes the electrode melt and thus forms the weld seam.
• The spot dot welding function is particularly suitable for thin body parts in the vehicle area. As a result, the issue points are precisely reproducible and even. Due to the spot function, little warmth gets into the workpiece, which leads to less default.

• Hotstart - Automatic voltage increase at start for better ignition results.
• Anti-Stick - Automatically shuts down the welding current if the electrode sticks allows for easy removal.
• MIG MAG - metal arc welding with direct current (DC). Welding can be carried out with inactive/inert (MIG: e.g. argon) or with active (MAG: e.g. CO2) gases. Gas and welding wire come from the torch head and enable welding work to be carried out with just one hand.
• Cored wire - The welder can use flux cored wire. This makes welding possible without inert gas. For this purpose, the device can be reversed particularly easily.
• Automatic wire feed - the speed of the wire feed is automatically controlled by the set welding current and also by selecting the wire thickness used on the device.
• Voltage (Volts) - Variable voltage control to manually adjust wire penetration and burn-off. This means that the various properties of a wide variety of materials can be influenced.
• 4-roller drive - reliable and powerful wire feed. Thanks to 4 drive rollers, even thicker wires are conveyed continuously and safely.
• Manual wire feed - no more loss of gas or the hassle of pushing the wire through. If a new roll of wire is to be fed through the hose package, this happens completely automatically using the wire push-through button.
• Wire roll - Commercially available wire rolls from 1 kg to 5 kg can be processed here. The bobbin mandrel can hold 16mm and 50mm bobbins.
• Wire drive roller - by simply changing the drive roller from 0.6 mm, 0.8 mm and 1.0 mm, different wire thicknesses can be used.
• Plasma / CUT - Electricity is used to generate a plasma jet that melts the material, which is then removed with compressed air. This means that all conductive metals such as standard steel, stainless steel, copper, aluminum, titanium and much more can be cut precisely with ease.
• Cutting thickness - Separating cuts are possible up to 14 mm, depending on the material. Structural steel ST37 up to 14 mm, V2A or V4A up to 8 mm, aluminum up to 5 mm.
• Cutting current - stepless adjustment from 15 to 50 A.
• Air delay - Infinitely adjustable air delay from 3 to 10 seconds to cool the torch and reduce wear on the nozzle and electrode.

Note: The device is not intended for use in residential areas where power is supplied via a public low-voltage supply system. It may be difficult to ensure electromagnetic compatibility in these areas due to both conducted and radiated interference.

• 1 x STAHLWERK combination welding machine CTM-250 ST Digital
• 1 x professional TIG welding torch WP-26F / hose package 3 meters
• 1 x TIG TIG accessory set 8 pieces
• 1 x professional MIG welding torch AK-15 / hose package 3 meters with Euro central connection
• 1 x MIG accessory set, 3 pieces (already pre-assembled on the MIG/MAG torch)
• 1 x contact tip M6 x 28 - ø 0.8 mm
• 1 x contact tip M6 x 28 - ø 1.0 mm
• 1 x Assembly Wrench
• 1 x professional plasma hose package AG-60/SG-55 3 meters
• 1 x 3-piece plasma accessory set (this is already pre-assembled on the plasma torch)
• 1 x gas connection hose with quick coupling 5 meters
• 1 x connecting hose with snap-on quick couplings from the device to the water separator, including 6-piece connection set
• 1 x Teflon tape
• 2 x wire guide rollers each 0.8 & 1.0V (already installed in the device), 0.6 & 0.8V, 1.0 & 1.2U
• 1 x ground cable 3 meters, 25 mm² and 9 mm mandrel connection
• 1 x electrode holder 3 meters, 25 mm² and 9 mm mandrel connection
• 1 x water separator with pressure gauge and snap-on quick couplings
• 1 x Slag Hammer
• 1 x Protective Case
• 1 x wear parts set AG-60 25 pieces
• 1 x MIG MAG 15AK wearing parts set, 28 pieces
• 1 x welding rod TIG ER70S G3 steel
• 1 x welding rods ER307Si TIG high-alloy stainless steel
• 1 x Tungsten Electrodes
• 1 x MIG MAG premium welding wire ER70S-6 SG2 S100/D100 wire roll 1 kg
• 1 x professional welding helmet
• 1 x pressure reducer
• Swiss fixed adapter 16A