STAHLWERK AC/DC TIG 200 ST | TIG welding machine with 200 A | Combination inverter AC/DC TIG and MMA/E-Hand | HF ignition | Hotstart and Anti-Stick | 2T and 4T mode | AC TIG welding for aluminum

• AC/DC TIG welding - alternating current (AC) and direct current (DC). Welding of almost all metals, such as steel, stainless steel, aluminum, copper and much more.
• 2 in 1 combination device - TIG & MMA welding is possible up to 200A. In AC mode, welding aluminum with alternating current is possible because the oxide layer is reliably broken up.
• IGBT technology - Latest and most modern transistor technology enables high performance when welding! No transformer, no MOSFET, state-of-the-art IGBT!
• Lightweight & compact design - only 11.5 kg weight and dimensions of 455 x 220 x 370 mm. Innovative IGBT transistors save space and weight compared to old MOSFET technology. No more heavy carrying!
• HF ignition - enables contactless ignition and ensures a significantly better welding result. No LIFT ARC, no strike ignition!
• Highest efficiency & performance - single-phase alternating current (230V) supplies the device and allows an output power of real 200 amps.
• Smart cooling & overheating protection - State-of-the-art technology, integrated overheating protection and high-performance cooling enable maximum performance to be achieved.

• 2T/4T (TIG) - determines operating mode control and provides advanced control over current flow. In 2T mode, the high-frequency ignition (HF) remains active until the button on the torch is released. In 4T mode, the arc is ignited after pressing and releasing the button once. After pressing and releasing again, the ignition is stopped. Some functions such as power reduction are only possible in the 4T.
• Current reduction - prevents the formation of voids (end craters) at the end of the weld seam.
• Gas pre- and post-travel (TIG) - protect the tungsten electrode from excessive wear and protect the weld seam from oxidation. The parameters can be set individually and separately. They indicate how long gas should flow before and after ignition.
• AC balance - is a variable setting between breaking up the oxide layer (-) and deeper penetration (+). This helps to influence the properties of different materials and alloys.
• Hotstart - Automatic voltage increase at start for better ignition results.
• Anti-Stick - Automatic shutdown of the welding current if the electrode sticks allows for easy removal.
• TIG (tungsten inert gas) - inert gas welding with inert/inactive gases such as Argon 4.6 (99.996%). An arc is created in an argon bell between the tungsten electrode and the workpiece. This melts the material and any additional material that may be added. A weld seam is created.
• MMA electrode welding / ARC welding - a universal welding process. An electric arc melts the electrode, forming the weld seam. No protective gas is required.

Note: The device is not intended for use in residential areas where power is supplied from a public low-voltage power supply system. It may be difficult to ensure electromagnetic compatibility in these areas due to both conducted and radiated interference.

• 1 x The STAHLWERK AC/DC TIG 200 ST IGBT welding machine
• 1 x professional TIG welding torch WP-26F / hose package 3 meters* with flexible torch head and kink protection on the gas connection
• 1 x TIG TIG accessory set, 8 pieces:
  - 3 x gas nozzle sizes: 5, 6, 7
  - 1 x clamping sleeve size 1.6
  - 1 x adapter sleeve housing size 1.6
  - 2 x burner caps - one short and one long
  - 1 x Universal Tungsten Electrode 1.6mm
  * Pre-assembled accessories from the welding torch picture are part of the 8-piece set
  
• 1 x ground cable 3 meters
• 1 x electrode holder 3 meters
• 1 x Wire Brush
• 1 x Slag Hammer
• 1 x gas connection hose with quick coupling 5 meters
• 1 x Snap-On Connector Kit
• 1 x Protective Case
• 1 x CH fixed adapter