Stahlwerk 4-in-1 combi welding device AC/DC WIG 200 PULS D CUT Full equipment, Digital 200 A IGBT Inverter with AC/DC WIG | MMA | Pulse function and integrated 50 A plasma cutter, suitable for aluminum and thin sheet

• AC/DC WIG welding change (AC) and DC (DC). Welding of almost all metals such as steel, stainless steel, aluminum, copper and much more.
• 2 in 1 combination device - WIG & MMA welding is possible up to 200 a.
• Extensive pulse function - WIG pulse - prevents burning of materials and reduces deformation by heat, particularly suitable for welding thin panels, the material of which may only be heated. Adjustable parameters are: impulse current, pulse width, pulse frequency, long and short pulse.
• IGBT technology - the latest and most modern transistors technology enables full power when welding! No transformer, no MOSFET, the most modern IGBT!
• Light & compact design - only 13.15 kg weight and dimensions of 455 x 220 x 370 mm. Innovative IGBT transistors save space and weight compared to the old MOSFET technology. No more difficult wear!
• HF ignition - enables contactless ignition and ensures a much better welding result. No lift arc, no stroking ignition!
• The device supplies the highest efficiency & performance - single -phase change current (230 V) and allows a output power of real 200 amps.
• Smart cooling & overheating protection - the latest technology, integrated overheating protection and high performance cooling enable the maximum performance.

• Job memory - memory option for self -configured settings / presets. There are 8 storage spaces available.
• 2T/4T (WIG) - determines the control of the operating mode and offers extended control over the course of the current. In 2T mode, the high frequency ignition (HF) remains active until the button on the Brenner is released. In the 4T mode, after pressing and letting go of the die button, the lacquer is ignited. After pressing and releasing again, the ignition ends. Some functions such as reducing electricity are only possible in the 4T.
• Electricity increase/lowering - prevents the formation of lunker places (end crater) at the end of welding.
• Gas pre and ritness (WIG) - protect the tungsten electrode from excessive wear and protect the weld seam from oxidation. The parameters can be set individually and separately. They state how long before and after the ignition should flow gas.
• AC balance-is a variable setting between the breaking of the oxide layer (-) and a deeper incorporation (+). This helps to influence the properties of different materials and alloys.
• AC frequency-The incubation and the seam width are controlled by AC frequencies between 50 and 80 Hertz.
• Welding current / pulse current - through the two parameters "welding current" and "impulse current" you can set two different current strengths for a welding process, between which the welding current always changes.
• Impulse width - With the impulse width, you set how long the welding current takes on the current strength of the pulse current before commuting back to the normal welding current thickness.
• Impulse frequency - The pulse frequency determines how often the current changes in a specified period between the two set values.
• Welding points | Spot function-The arc automatically expires after the time set beforehand (0.1-10 seconds).
• Lighting width - the scattering of the arc in AC mode can be controlled.
• Hotstart / Hot Striking - increase in tension when starting for better detonator results.
• Anti -stick - automatic shutdown of the welding current when the electrode sticks enables easy removal.
• WIG (Wolfram-Inert-Gas)-protective gas welding with inert/inactive gases such as Argon 4.6 (99.996%). An arc between tungsten electrode and workpiece is created in an argon bell. This melts the material and the additional material supplied if necessary. A weld seam is created.
• MMA electrode welding / ARC welding - a universal welding process. An arc makes the electrode melt and thus forms the weld seam. No protective gas is required.
• Plasma / cut - a plasma beam is generated using electricity, which melts the material on, which is then removed with compressed air. In this way, all conductive metals such as standard steel, stainless steel, copper, aluminum, titanium and much more can be easily cut precisely.
• The device is suitable for welding thin sheets as well as processing of band steels and flat iron at all types of steel with a low, medium or high carbon content as well as stainless steel, copper, nickel, CR-MO and alloyed steel metals.
• The plasma cutter delivers powerful 50 amps and has precise contact inflammation for first -class ignition behavior.
• The cutting output is up to 14 mm (construction steel ST37 to 14 mm, V2A or V4A up to 8 mm, aluminum up to 5 mm).

A notice: The device is not intended for use in living areas in which the power supply is carried out via a public low -voltage supply system. It may be difficult to ensure electromagnetic tolerance in these areas, both through line -bound and emitted disturbance.

• 1 x steel mill AC/DC WIG 200 PULS D welding machine
• 1 x professional WIG welding burner WP-26F / hose package 3 meters* with flexible burner head and kink protection on the gas connection
• 1 x Wig Tig accessory set 8 parts: 3 x gas nozzles Sizes: 5, 6, 7, 1 x clamping sleeve size 1.6, 1 x clamping sleeve housing size 1.6, 2 x burner cap-a short and a long, 1 x Universal tungsten electrode (* pre-assembled accessories from the mapping of the welding burner belongs to the 8-part set)
• 1 x PROFI plasma hose package AG-60/SG-55 3 meters.
• 1 x plasma accessories set 3-part (this is already pre-assembled on the plasma grenner): 1 x plasma jug, 1 x plasma electrode, 1 x ceramic cap
• 1 x water separator with manometer and snap-on quick couplings
• 1 x connection hose with snap-on quick couplings from the device to the water separator, including 6 partial connection set
• 1 x mass cable 3 meters
• 1 x electrode holder 3 meters
• 1 x wire brush
• 1 x gas connection hose with 5 meter speed coupling
• 1 x wearing parts Set AG-60 25-part: 10 x plasma jets, 10 x plasma electrodes, 5 x ceramic caps
• 1 x WIG welding sticks steel mill ER70S-G3 steel / Ø 2.4 x 500 mm / 1 kg
• 1 x steel mill er307si Wig welding sticks stainless steel up / Ø 1.6 mm x 500 mm / 1 kg
• 1 x WIG additional material aluminum er4043si5 2.4 mm x 500 mm 1 kg
• 1 x tungsten electrodes / welding electrodes WL15 gold 5 x 1.6 mm + 5 x 2.4 mm
• 1 x protective cover
• 1 x magnetic tool set 2 x magnetic angle of welding angles 4 kg / 9 lbs + mass jams
• 1 x pressure reducer
• 1 x steel plant full automatic welding helmet ST-900X black matt